Media Wall Bundle One

Our slat panels are a standard 2400 mm height and 600mm width. Some colours are also available in 2750mm or 600mm heights.

Our panels are simple to install and can be easily glued or screwed to most walls.

A video installation guide comes complimentry with every panel which gives and indepth discription of how to install the panels.

Our panels are simple to cut with a fine tooth handsaw or a sharp circular saw.

Just measure and mark out the height of your area and carefully cut!

This would depend on the width of your wall but follow the list below for help:

One panel = 60cm

Two panels = 120cm

Three panels = 180cm

Four panels = 240cm

Five panels = 300cm

Six panels = 360cm

Seven panels = 420cm

Eight panels = 480cm

Yes!

Because of our acoustic felt backing is slightly flexible it is possible to have these installed over uneven walls in most cases.

It is best to keep the panels away from direct contact from open flames and excessive heat. They can be installed close to heat sources but to mitigate any risk it is best to avoid direct contact.

These panels are designed for dry areas, however, it is possible to use these in areas of limited moisture.

If water does touch the surface it is best to dry this as soon as possible to avoid damaging the natural wood veneer.

Simply hoover with a soft brush nozzle and wipe with a damp cloth.

Yes this can be easily done using either strong adhesive or screws to attach the panels into the structal points.

The two main differance is the size of the slats and the colour options.

The standard slats are 27mm width and 12mm thickness. The premium slats are 57mm width and 18mm thick.

For the colour options, the standard slats have six colours currently. The premium slat range has around 100 possible colour choices!